Stepper Motors

CDA's
stepper motors provide an incremental step output depending on the
excitation logic applied to the motor windings. These stepper motors
provide high running torque capacity per unit weight and size.
Their high performance and excellent stepping accuracy make these
components ideal in open loop positioning systems, incremental rate
control systems, or limited angle rotary switched. Samarium Cobalt rare
earth magnets, high grade stainless steel construction, and class H225
insulation system assure rugged, reliable performance under the most
severe operating conditions.
Technical Data |
Diameter |
0,5 to 3 inch - 12,70 to 76,20 mm |
Length |
depending on winding, redundancy and feedback requirements |
Nominal Voltage |
from 3 to 500 V |
Step angle without
gearing |
15°, 30°, 45°, 60°, 90° |
Gear ratio |
4:1 to 6000:1 |
Output Torque |
18 to 3000 lb-In / 2 to 340 Nm,
depending on gearing and ratios |
Power Output |
up to 1 kW |